[VoiceOps] T38 over Sip

Sorensen, Marty Marty_Sorensen at adp.com
Fri Aug 28 12:08:36 EDT 2009


Weve had some good luck with fax machines (newer models) that state that they are voip compatible.  The model was a Lexmark X5650...I believe it was under $200. We also used a Quintum ATA instead of the crappy Cisco ones.

-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Scott Berkman
Sent: Friday, August 28, 2009 8:53 AM
To: 'Kevork Belian'; 'Junaid Hattia'; 'Alex Balashov'
Cc: voiceops at voiceops.org
Subject: Re: [VoiceOps] T38 over Sip

This isn't a great work around because it's almost impossible to tell your
customers "Oh just have the other side turn off ECM on their fax machine and
force the transmit speed to the lowest possible setting".  If they even
understand what that means, which they won't, they probably don't have
access/permissions to make the settings change on the machine.

Every time I have fax issues with a customer I am tempted to tell them just
how well Email works over IP :).  I know, faxes are legal documents and
emails are not (in GA anyway), but that just doesn't make any sense to me
logically.

	-Scott

-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org]
On Behalf Of Kevork Belian
Sent: Friday, August 28, 2009 10:20 AM
To: Junaid Hattia; Alex Balashov
Cc: voiceops at voiceops.org
Subject: Re: [VoiceOps] T38 over Sip

Disable ECM on Cisco gear (AS5400 and the exit gateway of PGW). 
You can disable ECM on the fax machine also.


-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org]
On Behalf Of Junaid Hattia
Sent: Friday, August 28, 2009 3:03 PM
To: Alex Balashov
Cc: voiceops at voiceops.org
Subject: Re: [VoiceOps] T38 over Sip

Attached is a call flow....

The basic prolem is that a fax call cannot be completed...


On 2009/08/28 1:29 PM, "Alex Balashov" <abalashov at evaristesys.com> wrote:

> There are many things that could be wrong there.  Problem description 
> is not sufficient.
> 
> Junaid Hattia wrote:
> 
>> Howdy
>> 
>> Ok so im trying to t38 over sip working with no luck
>> 
>> My test lab is as follows:
>> 
>> Pangea box connecting to a AS5400 via PRI, which then traverses an 
>> Acme Session director, broadsoft and then exits via PGW(SS7)
>> 
>> The sniffer capture says ³failure to train²
>> 
>> 
>> Any ideas?
>> 
>> --
>>  junaid
>> 
>> 
>> 
>> 
>> 
>> Please note: This email and its content are subject to the disclaimer 
>> as displayed at the following link 
>>
http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm.
>> Should you not have Web access, send an email to 
>> mailto:disclaimers at is.co.za and a copy will be sent to you.
>> 
>> 
>> ---------------------------------------------------------------------
>> ---
>> 
>> _______________________________________________
>> VoiceOps mailing list
>> VoiceOps at voiceops.org
>> https://puck.nether.net/mailman/listinfo/voiceops
> 


Please note: This email and its content are subject to the disclaimer as
displayed at the following link
http://www.is.co.za/legal/E-mail+Confidentiality+Notice+and+Disclaimer.htm.
Should you not have Web access, send a mail to disclaimers at is.co.za and a
copy will be emailed to you.


_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops


_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.


More information about the VoiceOps mailing list