[VoiceOps] SIP-I

[David Hiers]

How do you peer to your carrier, SIP or TDM?

David


On Fri, Aug 28, 2009 at 12:30 PM, Lee Riemer<lriemer at bestline.net> wrote:
> On an AS5350 the command is:
>
> signaling forward rawmsg
> or
> signaling forward unconditional
>
> I haven't used this, but it might shine light on the AS5xxx series as an
> alternative platform.
>
> http://www.cisco.com/en/US/docs/ios/voice/sip/configuration/guide/sip_cg-isdn.html#wp1047594
>
> Lee
>
> Russell McConnachie wrote:
>
> Hello,
> I'm working on a project which requires me to deliver SIP-I signaling to my
> carrier when originating outbound calls. Right now I have a OpenSER Proxy
> which is setup as a registrar/location server, and forks calls off-net to my
> carrier.
> Initially they asked me to provide them with a JIP (Jurisdiction Information
> Parameter) which I applied to the From header. Now they are asking that I
> send them all of the ISUP signaling encoded as a MIME attachment in the SIP
> dialogs. Being that I haven't worked with SIP-I before, I'm not exactly sure
> where to start, I was looking at the Cisco PGW 2200 which is capable of
> doing the SIP<->ISUP transaction mapping, do I have any other alternatives?
> Thanks
>
> ________________________________
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
>
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
>