[VoiceOps] CPE IAD recommendations

Scott Berkman scott at sberkman.net
Thu Sep 17 14:02:15 EDT 2009


Did you look at the Edgemarc's?  You sound like you need a 4508T4:
ftp://ftp.edgewaternetworks.com/pub/docs/datasheets/EM_4508T4_4508T4W_Datash
eet.pdf

I really recommend that you give them a shot and include this product in
your evaluation.

The ONLY TA900 that has FXS and multiple FXO ports is the TA924E-8FXO
(unless something has changed), which has 16 FXS and 8 FXO plus the one
fixed FXO, and is the most expensive of the TA-900 series.  I believe all
the TA9XXE's do have the one fixed FXO however if that is enough.

	-Scott

-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org]
On Behalf Of Jonathan Thurman
Sent: Thursday, September 17, 2009 1:43 PM
To: VoiceOps
Subject: Re: [VoiceOps] CPE IAD recommendations

> the patton smartnode series are my favorites.  fantastic debugging via
> cli, on par with and often surpassing ios (i was able to get my first
> few units fully working basically a few hours after unpack thanks to
> the debug).  cli itself has a few oddities but i find it pleasant to
> use overall.  support team is small but very helpful and responsive.

Looks like an interesting product line, but I didn't see any mix of
digital and analog.  What I really need is one PRI, and a couple of
FXS ports, and at least one FXO port.

> adtran i think unabashedly strives to make their cli as much like ios
> as possible.  if you're comfortable with cisco gear, then you should
> have no trouble configuring adtran.  there is a web gui also that
> compares very favorably to the competition's (helpful when you have
> low-skill support staff logging into on the devices).

The 908e looks promising.  I really like that you can play with the
GUI / CLI BEFORE you buy one.  Just have to register on the Adtran
website and go to http://www.adtran.com/vlab  I wish more vendors had
that.

Does anyone know if you can connect one of the T1 ports on a 908e to a
PSTN PRI?  The documentation is not clear and mainly talks about
customer facing PBX connections and data termination.  I have a call
into pre-sales, but nothing back yet...

> the cli on the audiocodes gear is kind of amazing, it seems like a
> throwaway project from someone's college operating systems course.

LOL, Ummm... Actually I don't remember any of my classmates having
THAT bad of an interface when I was taking Operating Systems...

-Jonathan
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops




More information about the VoiceOps mailing list