[VoiceOps] CPE IAD recommendations

[Chris Stinson]

Correct about the 908e. You have 8 fxs and 1 fxo. You can actually connect 2
PRIs up to it as well. T1 01 and 0/2 are T1 and T1 0/3 and 0/4 you can do
PRI. I just wish the Adtran could do T38 gateway services.

On Thu, Sep 17, 2009 at 1:02 PM, Scott Berkman <scott at sberkman.net> wrote:

> Did you look at the Edgemarc's?  You sound like you need a 4508T4:
>
> ftp://ftp.edgewaternetworks.com/pub/docs/datasheets/EM_4508T4_4508T4W_Datash
> eet.pdf<ftp://ftp.edgewaternetworks.com/pub/docs/datasheets/EM_4508T4_4508T4W_Datash%0Aeet.pdf>
>
> I really recommend that you give them a shot and include this product in
> your evaluation.
>
> The ONLY TA900 that has FXS and multiple FXO ports is the TA924E-8FXO
> (unless something has changed), which has 16 FXS and 8 FXO plus the one
> fixed FXO, and is the most expensive of the TA-900 series.  I believe all
> the TA9XXE's do have the one fixed FXO however if that is enough.
>
>        -Scott
>
> -----Original Message-----
> From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org]
> On Behalf Of Jonathan Thurman
> Sent: Thursday, September 17, 2009 1:43 PM
> To: VoiceOps
> Subject: Re: [VoiceOps] CPE IAD recommendations
>
> > the patton smartnode series are my favorites.  fantastic debugging via
> > cli, on par with and often surpassing ios (i was able to get my first
> > few units fully working basically a few hours after unpack thanks to
> > the debug).  cli itself has a few oddities but i find it pleasant to
> > use overall.  support team is small but very helpful and responsive.
>
> Looks like an interesting product line, but I didn't see any mix of
> digital and analog.  What I really need is one PRI, and a couple of
> FXS ports, and at least one FXO port.
>
> > adtran i think unabashedly strives to make their cli as much like ios
> > as possible.  if you're comfortable with cisco gear, then you should
> > have no trouble configuring adtran.  there is a web gui also that
> > compares very favorably to the competition's (helpful when you have
> > low-skill support staff logging into on the devices).
>
> The 908e looks promising.  I really like that you can play with the
> GUI / CLI BEFORE you buy one.  Just have to register on the Adtran
> website and go to http://www.adtran.com/vlab  I wish more vendors had
> that.
>
> Does anyone know if you can connect one of the T1 ports on a 908e to a
> PSTN PRI?  The documentation is not clear and mainly talks about
> customer facing PBX connections and data termination.  I have a call
> into pre-sales, but nothing back yet...
>
> > the cli on the audiocodes gear is kind of amazing, it seems like a
> > throwaway project from someone's college operating systems course.
>
> LOL, Ummm... Actually I don't remember any of my classmates having
> THAT bad of an interface when I was taking Operating Systems...
>
> -Jonathan
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
>
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops
>
>


-- 
---
Nexus Group
Chris Stinson
VoIP
cstinson at nxs.net
615.221.0103
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20090917/5b6211ac/attachment.html>