[VoiceOps] Automated call completion testing?

[Naushit Sakarvadia]

I would look at the CDR or Radius accounting message .
Whats wrong in relying in CDR/radius info?

-N


________________________________
From: Graham Freeman <graham.freeman at cernio.com>
To: voiceops at voiceops.org
Sent: Wed, June 9, 2010 4:27:37 PM
Subject: [VoiceOps] Automated call completion testing?

Hi, folks,

I'm on the hunt for an automated call completion testing solution.

Criteria:

Must test call completion, not just whether the SIP gateway IP is reachable and has low ping/jitter.

Must be able to notify defined points of contact (ideally via email) upon reaching a set failure threshold

Must be able to test legacy phone numbers (e.g. +14154622991)

Must be able to test via configurable routes


Should be open-source

Should be compatible with Asterisk

Should be something I can integrate with one or more of the following:  Zenoss, Nagios, AskoziaPBX, pfSense

Should be able to test both SIP URIs (e.g. sip:firstname.lastname at cernio.com) and legacy phone numbers (e.g. +14154622991).


Any suggestions?

thanks,

Graham Freeman
Cernio Technology Cooperative
www.cernio.com
graham.freeman at cernio.com


_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20100609/4291e69c/attachment.html>