[VoiceOps] Broadworks/Valcom paging solution

[Hiers, David]

You'll want to use the BW Privacy feature to exclude it from the helpful AA as well.


David Hiers

CCIE (R/S, V), CISSP
ADP Dealer Services
2525 SW 1st Ave.
Suite 300W
Portland, OR 97201
o: 503-205-4467
f: 503-402-3277


-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Scott Berkman
Sent: Monday, November 29, 2010 2:34 PM
To: 'Dawson, Robert'; VoiceOps at voiceops.org
Subject: Re: [VoiceOps] Broadworks/Valcom paging solution

Done it many times, but it really isn't anything specific to BroadWorks except for remembering to be careful about allowing calls from the outside in anyway (think telemarketers and wrong numbers over the PA).  We usually just didn't give that user a DID.


 

Normally we used an ATA or IAD coupled with a line controller (usually the V-9970: http://www.valcom.com/pdf/v-9970.pdf), and tell the customer that from there (amps and speakers/horns as well as wiring) it is the responsibility of their paging vendor.  I've also worked with Bogen systems that had an integrated line controller, but that one expected an FXO handoff so we had to use a different CPE device.  It was also a much higher end system than any of the Valcom setups I have seen.

 

If you need to know anything more specific feel free to ask, but to me the PA side of the systems is a whole different game I'd much rather stay out of.

 

                -Scott

 

From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Dawson, Robert
Sent: Monday, November 29, 2010 4:58 PM
To: VoiceOps at voiceops.org
Subject: [VoiceOps] Broadworks/Valcom paging solution

 

Anyone out there have experience with  Valcom paging solutions on Broadworks? This would be a simple application - 1 zone and 2 horns. Any recommendations for other products?



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.