[VoiceOps] Broadworks hunt group CNAME manipulation

Mark Holloway mh at markholloway.com
Fri Jun 3 14:03:38 EDT 2011

I can't speak to a work around at this point but I have mentioned this to Broadsoft before as a feature enhancement/request.  The last I heard was possibly R18.

On Jun 3, 2011, at 9:39 AM, Nelson Hicks wrote:

> Hello,
> We have a few hunt groups built out in BroadWorks and have noticed that the hunt group name is prepended to the caller name when an inbound call to the hunt group is sent to one of its members.  This could be a very useful feature, but our current hunt group customers don't want this and the only setting I've found for it in Broadworks disables it globally.
> I've looked for options to rewrite the caller name part of the display field, either on our SBC or the TA900 CPE, but neither seems to support stripping off the first part of the display name and leaving the rest.
> Has anyone else already dealt with this?  If so, what solution did you end up with?
> -- 
> Nelson Hicks
> DNS and Web Administrator
> (573) 817-0000
> dns at socket.net
> 1-800-SOCKET-3  www.socket.net
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops

More information about the VoiceOps mailing list