[VoiceOps] PSTN Forwarding - Broadsoft and Adtran

Robert Dawson RDawson at alliedtelecom.net
Fri Feb 3 12:41:41 EST 2012

For anyone interested – apparently the contact header has to contain user=phone for the TGI to be evaluated. Not sure if this is unique to R17sp4 or not.

From: Zak Rupas [mailto:zak at simplesignal.com]
Sent: Thursday, February 02, 2012 8:40 PM
To: Robert Dawson
Cc: voiceops at voiceops.org
Subject: Re: [VoiceOps] PSTN Forwarding - Broadsoft and Adtran


Use these commands and you'll be able to locate why the 404. You may have a config based issue as well
These will help isolate if it's on Broadsodt (Missbuilt,DeviceTypeIssue,Registration,etc)

Adtran CLI
#Debug isdn-L2 formatted (tab this out to make sure) this will contain a cause code

#debug sip stack messages (why and where the 404)

#debug voice verbose

I have a bunch more so let me know


Zak Rupas

On Feb 2, 2012, at 6:29 PM, Robert Dawson <RDawson at alliedtelecom.net<mailto:RDawson at alliedtelecom.net>> wrote:
I have this all configured – trunk group identity defined in BS, configured on the Adtran, I can see the tgrp and trunk-context info in the invite – call is being rejected with a 404 by the NS. Output from vtri shows that the call fails at OrigRedirect due to line/port not found.

Thoughts and input greatly appreciated.

VoiceOps mailing list
VoiceOps at voiceops.org<mailto:VoiceOps at voiceops.org>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20120203/8d79eb4e/attachment.html>

More information about the VoiceOps mailing list