[VoiceOps] question about campus installations

[Carlos Alcantar]

The Adtran Total Access 900 series also does MGCP but I believe it max's
out at 24 ports per 1U.

Carlos Alcantar
Race Communications / Race Team Member
101 Haskins Way, So. San Francisco, CA. 94080
Phone: +1 415 376 3314 / carlos at race.com / http://www.race.com





-----Original Message-----
From: John Osmon <josmon at rigozsaurus.com>
Date: Wed, 25 Jan 2012 20:08:43 -0700
To: Shripal Daphtary <shripald at gmail.com>
Cc: VoiceOps <voiceops at voiceops.org>
Subject: Re: [VoiceOps] question about campus installations

On Wed, Jan 25, 2012 at 02:24:54PM -0500, Shripal Daphtary wrote:
> Hey all, i have a question that i could use some help on.
> 
> I have a customer that wants to replace a PBX that is shared between
> administration and residences in a campus environment with a VoIP
>solution.
[...]
> I was thinking of bringing in several Adit600 chassis, with 5x8port FXS
> cards in each, which would give me 40 FXS ports/chassis.  meaning  6
> chassis.  i would likely use MGCP, b/c it works well with the Adit.
[...]
>
> I'm running an Broadsoft M6.

I used to run an M6 back when it was VocalData's VOISS.  We ran ADIT
600s in MGCP for several smaller installations. They worked great.

Also ran a Zhone MALC in MGCP.  A nice solution with the M6 for places
where you want dial-tone and ADSL2+.

I think I'd still run MGCP if I was installing either today -- then
again the M6 might support SIP better now.  (At one point, SIP requests
from unsupported software could cause the M6 to reboot...  That was
*NOT* a fun support call.)

You can pickup ADITs on the used market pretty cheaply now.  You might
grab one to test.  A couple of months ago, I could have shipped you
the one that sat in my garage for 3 years...
_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops