[VoiceOps] Paging system integration with VoIP

[Todd Wolf]

CISCO PAP2T and a VIKING ELECTRONICS CPA7B

-----Original Message-----
From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org] On Behalf Of Jay Hennigan
Sent: Tuesday, March 13, 2012 12:58 PM
To: voiceops at voiceops.org
Subject: Re: [VoiceOps] Paging system integration with VoIP

On 3/13/12 9:27 AM, Carlos Alvarez wrote:
> Does anyone here have advice on connecting a Valcom paging system with 
> a hosted VoIP system?  The site is about a thousand miles away so I 
> can't just go play with it.  At the most basic level I'm considering 
> just a cheap phone on auto-answer and a connection from its headset 
> jack to the paging amp.  Any other ideas?

Bogen makes a paging interface TAM-B that connects to an FXS port on an ATA or TA900 Adtran.  Works very well.

Hint:  Put it on an extension-only number if possible so that random wrong numbers and telemarketers don't clobber it.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net Impulse Internet Service  -  http://www.impulse.net/ Your local telephone and internet company - 805 884-6323 - WB6RDV _______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops