[VoiceOps] Question about PIC codes

[Scott Berkman]

Usually you can use 101- "casual access" codes (special dial plans
configured in the softswitch), but it all depends on who you are sending the
calls to and what they support.

 

Here is one reference:

http://www.phone-bill-busters.com/casual_access.htm

 

And do note this caution:

CAUTION - do NOT use the 101-XXX dialing method unless you have an account
already set up with the carrier in question, or else the calls made in this
fashion may be billed to you at atrociously high rates.

 

If you are doing SS-7 with your ULC there is a field specifically for this
and you'd configure that in your calss4/5 switch.

 

Good luck,

 

-Scott

 

 

From: voiceops-bounces at voiceops.org [mailto:voiceops-bounces at voiceops.org]
On Behalf Of Robert Dawson
Sent: Thursday, March 15, 2012 10:59 AM
To: voiceops at voiceops.org
Subject: [VoiceOps] Question about PIC codes

 

We have recently received a few requests to PIC their LD. I honestly don't
even think that in our current configuration we are capable of doing PICs -
just curious if anyone has any experience/pertinent knowledge related to the
topic?

 

Thanks,

Rob

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20120315/84d6430e/attachment.html>