[VoiceOps] RTP End?

[Gavin Henry]

On 12 September 2012 23:44, Clint Mojzes <clintm at ringcentral.com> wrote:
> It very well could be, however there would need to be some way to identify that frame as the last frame, like some sort of timer (previously defined in SDP), special indicator in the actual RTP frame, or the frame would need to be closely followed by a BYE. Otherwise our tool would have to arbitrarily choose a frame as the last frame. But, I had the same suspicion so I tried to induce this BYE by causing 100% packet loss on the media stream, and was not able to cause the RTP BYE.

If this is a commercial tool can't they tell you?

-- 
Kind Regards,

Gavin Henry.
Managing Director.

T +44 (0) 1224 279484
M +44 (0) 7930 323266
F +44 (0) 1224 824887
E ghenry at suretec.co.uk

Open Source. Open Solutions(tm).

http://www.suretecsystems.com/

Suretec Systems is a limited company registered in Scotland. Registered
number: SC258005. Registered office: 24 Cormack Park, Rothienorman, Inverurie,
Aberdeenshire, AB51 8GL.

Subject to disclaimer at http://www.suretecgroup.com/disclaimer.html

Do you know we have our own VoIP provider called SureVoIP? See
http://www.surevoip.co.uk

Did you see our API? http://www.surevoip.co.uk/api