[VoiceOps] VoIP Testing

Shripal Daphtary shripald at gmail.com
Tue May 23 17:20:50 EDT 2017


Mark, what type of device are you using as the sensor?  

I've been looking for a raspberry pi with two Ethernet interfaces but I can't seem to find one.

I'm assuming we need on port for port mirror traffic and one for internet access to send the data back to voipmonitor. 



Thanks, 

Shripal

> On May 23, 2017, at 3:49 PM, Mark Wiater <mark.wiater at greybeam.com> wrote:
> 
> 
>> From time to time we have some remote clients who are facing voice quality issues on their endpoints and I have no real good way of troubleshooting or pin pointing the problem.
> While it's not completely free, I couldn't live without voipmonitor for this very use. I install a sensor in the client network on a mirror port or on the phone system and get to see exactly what they see, from a voip perspective.
> 
> The collection software is open source but the gui is invaluable.
> 
> 
> 
> _______________________________________________
> VoiceOps mailing list
> VoiceOps at voiceops.org
> https://puck.nether.net/mailman/listinfo/voiceops


More information about the VoiceOps mailing list