[VoiceOps] ICTFAX - configuration
myaklin at firstlight.net
Tue Oct 24 13:18:14 EDT 2017
Well the status thing is bullet choice in the ictfax demo page. blocked or active. So yes I agree with you.
Yes.. most sip trunk I setup use the IP address of each side to auth each other. In some rare cases with a Mitel PBX to Taqua I had to setup a username/pass that I tell the PBX vendor to register with.. but the Taqua does not care what password it is. It just wants the process of registering to function for some odd reason. Only Mitel.. no others.
ICTFAX.. is using freeswitch I assume (why i said freepbx I dunno. Probably an interface I used a decade ago). So what is the far side running? That will determine how you setup ictfax/freeswitch.
From: Izzy Goldstein - TeleGo <igoldstein at telego.net>
Sent: Tuesday, October 24, 2017 1:10:44 PM
To: Matthew Yaklin
Subject: Re: [VoiceOps] ICTFAX - configuration
Matt, thanks for the response
there is another field "status", which i assume enable/disable the trunk
and register tell the trunk if it needs to register? vs just using it as a gateway that doesn't require a SIP Registration ?
im looking for anyone on this list that wouldn't mind being bothered with a few questions regarding
On Tue, Oct 24, 2017 at 1:03 PM, Matthew Yaklin <myaklin at firstlight.net<mailto:myaklin at firstlight.net>> wrote:
The register field is either true or false based on the far end side wanting you to register or not.
The dial string is where to route stuff to. sofia/gateway/%trunk/%phone for example... sofia is the freepbx sip stack or something. Forgive me. I do not use FreePBX.
From: VoiceOps <voiceops-bounces at voiceops.org<mailto:voiceops-bounces at voiceops.org>> on behalf of Izzy Goldstein - TeleGo <igoldstein at telego.net<mailto:igoldstein at telego.net>>
Sent: Tuesday, October 24, 2017 12:42:09 PM
Subject: [VoiceOps] ICTFAX - configuration
has anyone successfully configured ICTFAX on centos ?
i am trying to follow the guide, and im stuck with getting the SIP Trunk registered,
I want to register the ictfax to a SIP Trunk,
I have the trunk information, (host, username, password)
but in the GUI it is asking for other information which I don't know what it is, for example the "Dial String" and the "Register" field.
Username, I assume is the username used for the SIP Registration
Password, I assume is the password used for the SIP Registration
Host, I assume is the Server Address, can I use a Fully Qualified Domain Name in this field ? or it has to be a IP Value ?
Port, I assume I enter for example 5070, or whatever port the SIP Server is set to listen on
add prefix, it has 00 in it. I assume I don't need this, unless the SIP Trunk carrier is asking to prefix all calls with a special value
Dial string and Register fields i dont know what to put in there, and leaving it blank does not register the SIP Trunk
Chief Technology Officer
Main: (212) 477-1000 x 2085<tel:(212)%20477-1000>
Direct: (929) 477-2085<tel:(929)%20477-2085>
Confidentiality Notice: This e-mail may contain confidential and/or privileged information. If you are not the intended recipient or have received this e-mail in error please notify us immediately by email reply and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. Any views or opinions presented in this email are solely those of the author and do not necessarily represent those of TeleGo (T). Employees of TeleGo are expressly required not to make defamatory statements and not to infringe or authorize any infringement of copyright or any other legal right by email communications. Any such communication is contrary to TeleGo policy and outside the scope of the employment of the individual concerned. TeleGo will not accept any liability in respect of such communication, and the employee responsible will be personally liable for any damages or other liability arising.
TeleGo Hosted PBX<https://youtu.be/DaT8YAZ4V0w>
-------------- next part --------------
An HTML attachment was scrubbed...
More information about the VoiceOps