[VoiceOps] Broadworks / Merging calls with Voipmon

[Zilk, David]

If you click on the ‘Merge’ dropdown while displaying the Legs by Header, you can select ‘SIP History’ to display the SIP Ladder diagram of all the legs together.

David

From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of Matthew Beckwell
Sent: Monday, January 22, 2018 1:02 PM
To: voiceops at voiceops.org
Subject: Re: [VoiceOps] Broadworks / Merging calls with Voipmon

Hi Matt,
Here's what I've done to get close to what you're looking for...

In the BroadWorks Application Server, set these parameters:

AS_CLI/Interface/SIP>
sendCallCorrelationIDAccess = true
sendCallCorrelationIDNetwork = true


Once you do that, you'll see BroadWorks start to add a header for "related" calls. They will have have a common correlation header (but different call-id) like this:

X-BroadWorks-Correlation-Info:1126786:1


Then, in voipmonitor.conf you can set this parameter in the sniffer configuration to keep track of that header's value in the database:

matchheader = X-BroadWorks-Correlation-Info


VoIPmonitor won't merge them into a single SIP Diagram (at least not that I've found)-- but you should start to see the "related" call legs (with different Call-ID's but the same X-BroadWorks-Correlation-Info header) show up in the "Legs by header" tab when you're looking at a call's details in the VoIPmonitor GUI.

~Matthew





On Mon, Jan 22, 2018 at 2:36 PM, Matthew Crocker <matthew at corp.crocker.com<mailto:matthew at corp.crocker.com>> wrote:

Hello,


We currently have Broadworks/AcmePacket handling calls to/from customers.  We have a couple VoipMon sensors running watching all traffic inside/outside our SBC.   Currently calls are presented in VoipMon as two different calls (PSTN -> Broadworks & Broadworks -> Polycom) or (Polycom -> Broadworks & Broadworks -> PSTN).     The Call-id on each call is different,  Broadworks generates a new SIP Dialog for the call.   If the customer has a hunt group there could be several INVITEs going out to multiple phones, all with different Call-Id.     Does anyone know of a way to get VoipMon to merge the calls into a single CDR/SIP Diagram?  Is there a way to configure Broadworks to embed the original Call-Id in the new INVITE (Parent-Call-Id Header)?

I’m running R20sp1

Thanks

-Matt

--
Matthew Crocker
Crocker Communications, Inc.
President

_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org<mailto:VoiceOps at voiceops.org>
https://puck.nether.net/mailman/listinfo/voiceops<https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_voiceops&d=DwMFaQ&c=N13-TaG7c-EYAiUNohBk74oLRjUiBTwVm-KSnr4bPSc&r=VcRLyVxkyGds34uxiPM944HQvaWq-nynyZXfNpSfhOs&m=DPywImXDofS37q3FK-CGpyiEaDc6gi0BFORMDbPZPRg&s=9CuOLGl9u8cnWJw9-dABvCLAolSSIQUnP2QC3mnjiDk&e=>


----------------------------------------------------------------------
This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, notify the sender immediately by return email and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/voiceops/attachments/20180122/97129bb6/attachment-0001.html>