[VoiceOps] Alarm panels and how they dial DTMF digits - pots migration from DMS to Metaswitch issue

[Nathan Anderson]

https://supportcommunity.adtran.com/t5/General/How-to-Perform-a-DSP-capture/ta-p/27456

Unfortunately, it sounds like it might not capture DSP input unless it is a call actually already in progress, and (if the doc is to be believed) is going from IP/RTP to TDM and/or analog, or vice-versa.  Ugh.

There's got to be a way...

-- Nathan

-----Original Message-----
From: VoiceOps [mailto:voiceops-bounces at voiceops.org] On Behalf Of Nathan Anderson via VoiceOps
Sent: Monday, February 13, 2023 5:21 PM
To: Matthew Yaklin
Cc: Voice Ops
Subject: Re: [VoiceOps] Alarm panels and how they dial DTMF digits - pots migration from DMS to Metaswitch issue

Matthew Yaklin wrote:

> I have not considered that. I work remotely with all of this gear and I would have to guide a tech to do such a thing. I don't think a butt set and a tape recorder would be sufficient to record the audio which is about all I could possibly scratch up without spending money.

I have to wonder if there is a way to get the Adtran to dump a copy of the audio in digital form to a local file, that you could then pull off the system remotely.  It has to A-to-D it at some point in order to process it, right?

-- Nathan

_______________________________________________
VoiceOps mailing list
VoiceOps at voiceops.org
https://puck.nether.net/mailman/listinfo/voiceops