[cisco-voip] Inbound Caller Name

[Carter, Bill]

It appears I am CallerID Name from Telco, but CallManager is not
displaying this on the phones.  I am using a H323 Gateway and CCM
3.3(4)SR01.

On the CCM Gateway configuration page, I have "Display IE Delivery"
checked.  Since this is under "Outbound Calls" I don't know if this
applies to inbound Caller name.

How can I get calling party name to pass to the IP Phones?

        Bearer Capability i = 0x8090A2
                Standard = CCITT
                Transer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA98383
                Exclusive, Channel 3
        Facility i = 0x9F8B0100A10F02010106072A8648CE1500040A0100
                Protocol Profile =  Networking Extensions
                0xA10F02010106072A8648CE1500040A0100
                Component = Invoke component
                        Invoke Id = 1
                        Operation = InformationFollowing (calling_name)
                                Name information in subsequent FACILITY
message
        Calling Party Number i = 0x2183, 'XXXXXXXXXX'
                Plan:ISDN, Type:National
        Called Party Number i = 0x80, '0811'
                Plan:Unknown, Type:Unknown
        Channel ID i = 0xA98383
                Exclusive, Channel 3
        Progress Ind i = 0x8188 - In-band info or appropriate now
available
Mar  1 10:43:24.742: ISDN Se2/0:23 Q931: RX <- FACILITY pd = 8  callref
= 0x4F31

        Facility i =
0x9F8B0100A117020101020100800F535052494E474649454C4420434C4
9
                Protocol Profile =  Networking Extensions
                0xA117020101020100800F535052494E474649454C4420434C49
                Component = Invoke component
                        Invoke Id = 1
                        Operation = CallingName
                                Name presentation allowed
                                Name = MY NAME