[cisco-voip] Panic Buttons

[Rusty Painter]

What does that cost?
 
Rusty Painter
MCP/A+
Microcomputer Technician
Dorchester County ITS
201 Johnston St.
St. George, SC 29477
Tel:           (843) 563-0022
Fax:          (843) 563-0033
E-mail:       <mailto:rpainter at dorchestercounty.net>
rpainter at dorchestercounty.net
 
-----Original Message-----
From: Voll, Scott [mailto:Scott.Voll at wesd.org] 
Sent: Tuesday, March 29, 2005 11:19 AM
To: Rusty Painter; Spencer Wood
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Panic Buttons
 
I know you already have a system for panic, but if you wanted to change to a
new system, we are using Berbee's InformaCast.  We setup a service that if
they press a button, it will multicast to all phones you want an audio and
text message.  IE.  security, admin, and supervisors and not the rest of the
phones.
 
Scott
 
  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Rusty Painter
Sent: Tuesday, March 29, 2005 7:45 AM
To: 'Spencer Wood'; Rusty Painter
Cc: cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Panic Buttons
 
Where do I do this at?  I could not find it in CCM.
 
Rusty Painter
MCP/A+
Microcomputer Technician
Dorchester County ITS
201 Johnston St.
St. George, SC 29477
Tel:           (843) 563-0022
Fax:          (843) 563-0033
E-mail:       <mailto:rpainter at dorchestercounty.net>
rpainter at dorchestercounty.net
 
-----Original Message-----
From: Spencer Wood [mailto:Spencer.Wood at dot.state.oh.us] 
Sent: Tuesday, March 29, 2005 10:30 AM
To: Rusty Painter
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Panic Buttons
 

Try changing the Call supervision method to drop Loop Current on the 224
Port.  I'm not sure if that will work for you, but it has worked for us with
our overhead paging systems.. 

Spencer 

************************************************************
Spencer Wood, Network Manager
Ohio Department Of Transportation
1320 Arthur E. Adams Drive
Columbus, Ohio 43221 
E-Mail:  <mailto:Spencer.Wood at dot.state.oh.us> Spencer.Wood at dot.state.oh.us
Phone: 614.644.5422/Fax: 614.887.4021/Cell: 614.774.3123 
************************************************************* 

Rusty Painter <RPainter at dorchestercounty.net> 
Sent by: cisco-voip-bounces at puck.nether.net 
03/29/2005 09:48 AM 

To
cisco-voip at puck.nether.net 

cc
 

Subject
[cisco-voip] Panic Buttons
 

 
 



Ok.  Here's what's going on.  We have Panic Buttons in all of our Judges
chambers and on the bench.  With our old PBX phone system, the button was
pressed, it sent a signal to dispatch, dispatch picked up the phone, and it
turned off the "alarm".  We hooked all of these panic buttons up through a
VG224 analog gateway.  When the button is pressed, it does call dispatch,
dispatch picks up the phone and it quits ringing.  When the operator puts
the phone back on hook, it starts to ring from the panic button again.  The
only way for me to shut it off, is to reset the gateway.  Does this make
sense to anyone?  It doesn't to me.  Does anyone know of any panic buttons
that are known to work with VoIP?  Thanks. 
  
Rusty Painter 
MCP/A+ 
Microcomputer Technician 
Dorchester County ITS 
201 Johnston St. 
St. George, SC 29477 
Tel:           (843) 563-0022 
Fax:          (843) 563-0033 
E-mail:       <mailto:rpainter at dorchestercounty.net>
rpainter at dorchestercounty.net 
 _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050329/c25c4cb0/attachment-0001.html