[cisco-voip] Multiple PRIs

[Carter, Bill]

You can set this up with your service provider.  This can be part of an
inbound hunt group configuration where the Telco sends calls down the
primary PRI, then if the channels are full or not available, inbound
calls roll to the 2nd PRI.

-----Original Message-----
From: Israel Lang [mailto:zephy316 at gmail.com] 
Sent: Tuesday, March 29, 2005 11:57 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Multiple PRIs

Quick question....currently we have a CM cluster that is shared between
multiple locations that are all connected via T1 lines. Two of those
locations have voice gateways with PRI PSTN connectivity. All locations
reside within a two mile radius within the same city.

My question is: Is there a way to have the PRI act as failovers for one
another on inbound calls? I know how to do this with outbound calls, but
wasn't sure there was a way to do it without calling the TELCO and
having them move the DID numbers and then move them back once the PRI is
backup and running.

Thanks for your help in advance.
--
Have a great day!!!!!!!!!!
zephy316_gmail.com

Replace the _ with an @ symbol
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip