[cisco-voip] Multiple PRIs
Israel Lang
zephy316 at gmail.com
Tue Mar 29 16:32:55 EST 2005
Thanks. Is this true even when the PRIs going into separate gateways
and in separate facilities?
On Tue, 29 Mar 2005 12:00:30 -0600, Carter, Bill <WCarter at sentinel.com> wrote:
> You can set this up with your service provider. This can be part of an
> inbound hunt group configuration where the Telco sends calls down the
> primary PRI, then if the channels are full or not available, inbound
> calls roll to the 2nd PRI.
>
> -----Original Message-----
> From: Israel Lang [mailto:zephy316 at gmail.com]
> Sent: Tuesday, March 29, 2005 11:57 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Multiple PRIs
>
> Quick question....currently we have a CM cluster that is shared between
> multiple locations that are all connected via T1 lines. Two of those
> locations have voice gateways with PRI PSTN connectivity. All locations
> reside within a two mile radius within the same city.
>
> My question is: Is there a way to have the PRI act as failovers for one
> another on inbound calls? I know how to do this with outbound calls, but
> wasn't sure there was a way to do it without calling the TELCO and
> having them move the DID numbers and then move them back once the PRI is
> backup and running.
>
> Thanks for your help in advance.
> --
> Have a great day!!!!!!!!!!
> zephy316_gmail.com
>
> Replace the _ with an @ symbol
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
--
Have a great day!!!!!!!!!!
zephy316_gmail.com
Replace the _ with an @ symbol
More information about the cisco-voip
mailing list