[cisco-voip] FXO port configuration to a Valcom paging system

[Scott Ingram]

If I have to use an FXS would  a Vg224 work or would I need to hang it
off the router ?

 

________________________________

From: King, Jesse [mailto:JKing at thegranitegroup.com] 
Sent: Thursday, March 31, 2005 8:47 AM
To: Scott Ingram; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging
system

 

Not sure if an fxo would work? I use fxs for all my paging.. Valcom,
bogen, etc...

	-----Original Message-----
	From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Scott Ingram
	Sent: Wednesday, March 30, 2005 10:09 PM
	To: cisco-voip at puck.nether.net
	Subject: [cisco-voip] FXO port configuration to a Valcom paging
system

	We have a Valcom page system and I have set up my FXO 2/0/0 ->

	!

	dial-peer voice 999200 pots

	 application mgcpapp

	 port 2/0/0

	!

	 However, when I dial I get a pause and a then a fast busy.  I
have set the port sub unit to the device pool, etc. I have a route for
89 as the page number.  On the Nortel you dial 89 then 1 through 4 for
the zones.  Any thoughts?

	 

	 

	 

	Scott Ingram

	Manager of Network operations and Design

	Clayton Services, Inc

	T: 203-926-8148

	F: 203-926-5751

	singram at clayton.com

	 

	 

	 


IMPORTANT NOTICE:

This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately and destroy the transmitted information.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050331/ea6374bd/attachment.html