[cisco-voip] FXO port configuration to a Valcom paging system

[Lelio Fulgenzi]

While we're on the topic, we were told to use the BOGEN TAM-Bs for our overhead paging because of disconnect supervsion.

However, I noticed on the VG248 that it has the following parameter and options:

Call supervision method: <none>, drop loop current, reverse polarity

Would this have been enough?


  ----- Original Message ----- 
  From: Scott Ingram 
  To: King, Jesse ; cisco-voip at puck.nether.net 
  Sent: Thursday, March 31, 2005 10:16 AM
  Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging system


  If I have to use an FXS would  a Vg224 work or would I need to hang it off the router ?

   


------------------------------------------------------------------------------

  From: King, Jesse [mailto:JKing at thegranitegroup.com] 
  Sent: Thursday, March 31, 2005 8:47 AM
  To: Scott Ingram; cisco-voip at puck.nether.net
  Subject: RE: [cisco-voip] FXO port configuration to a Valcom paging system

   

  Not sure if an fxo would work? I use fxs for all my paging.. Valcom, bogen, etc...

    -----Original Message-----
    From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Scott Ingram
    Sent: Wednesday, March 30, 2005 10:09 PM
    To: cisco-voip at puck.nether.net
    Subject: [cisco-voip] FXO port configuration to a Valcom paging system

    We have a Valcom page system and I have set up my FXO 2/0/0 ->

    !

    dial-peer voice 999200 pots

     application mgcpapp

     port 2/0/0

    !

     However, when I dial I get a pause and a then a fast busy.  I have set the port sub unit to the device pool, etc. I have a route for 89 as the page number.  On the Nortel you dial 89 then 1 through 4 for the zones.  Any thoughts?

     

     

     

    Scott Ingram

    Manager of Network operations and Design

    Clayton Services, Inc

    T: 203-926-8148

    F: 203-926-5751

    singram at clayton.com

     

     

     

  IMPORTANT NOTICE:

  This message is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law.  If you have received this message in error, you are hereby notified that we do not consent to any reading, dissemination, distribution or copying of this message.  If you have received this communication in error, please notify the sender immediately  and destroy the transmitted information.



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20050331/1888c23d/attachment.html