[cisco-voip] debug isdn q931

[Ed Leatherman]

Just had the defaults on both routers, however I tried the "logging console
7" on the problem router, which looks like it should display debuging
messages and it still shows nothing.

Just for grins and giggles I turned on debug cdp packets, and i am getting
debug messages on both routers.. so its something with the ISDN that is
causing it to not display.

On 6/15/06, Mark Borchers <mborchers at igillc.com> wrote:
>
>  Have you set your logging level high enough to show debug traffic?  See
> the logging console command args.
>
>  -----Original Message-----
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Ed Leatherman
> *Sent:* Thursday, June 15, 2006 10:26 AM
> *To:* ciscovoip
> *Cc:* jeff.davis at mail.wvu.edu
> *Subject:* [cisco-voip] debug isdn q931
>
> I'm fairly certain this is something I am doing wrong but I cant find it
> for the life of me..
>
> I have 2 ISR routers, 3825 with some T1 interfaces and DSPs for
> conferencing. identical firmware loads and configurations, other than 1 has
> an FXO card that the other doesn't.
>
> I'm executing on both routers from seperate SSH sessions:
> # term mon
> # debug isdn q931
>
> On router A, I can see all the Q931 debug messages go by. On router B, I
> see nothing on the SSH session however I know calls are being placed on it (
> I can see the channels going in service etc from RTMT). Could I have
> something turned off on router B that doesnt show up in the config?
>
> --
> Ed Leatherman
> IP Telephony Coordinator
> West Virginia University
> Telecommunications and Network Operations
>



-- 
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060615/5c7da8fe/attachment.html