[cisco-voip] IOS GW PRI Registration to separate CallManagers

[Hinson, Greg]

I believe you can run multiple MGCP processes, going to different
callmanagers. there is a command that is labeled 
"MGCP profile default" that is part of the running config parameters for
MGCP. You should be able to create multiple MGCP profiles, assigning
each their own mgcp call-agent, but I haven't tested that.

- Greg Hinson

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ryan Ratliff
Sent: Wednesday, June 28, 2006 7:25 AM
To: Justin Church
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] IOS GW PRI Registration to separate
CallManagers

I don't think you can run two mgcp processes on a router.

-Ryan

On Jun 28, 2006, at 10:20 AM, Justin Church wrote:

We're running 2821 IOS gateways using MGCP backhaul to CCM 4.1(3).  I
have several spare PRI interfaces and would like to register a different
PRI on the same GW with a different CM (specifically my CM 5.0(3)).  Is
that possible?

-jc
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.