[cisco-voip] SRST Dial Peer

[Gary Roberton]

Hi all

I have a site running SRST and have the following dial peer;

 dial-peer voice 10015 pots
 description Used for Incoming & Outgoing Calls on Serial1/0/0:15
 destination-pattern 9.T
 direct-inward-dial
 port 1/0/0:15
 forward-digits all


This should send everything but the 9 to line.  It is not working - the 9 is
being sent.  If I change the forward digits to 11 (UK Numbering) then it is
all fine as long as I dial 9xxxxx xxxxxx.  Has anyone else seen this?  I am
running a 2811 with c2800nm-ipvoice-mz.123-11.T - SRST is 3.2.

Regards

Gary
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060307/3e46f912/attachment.html