[cisco-voip] PRI Card question

[Arnold, Paul]

I am ordering a PRI for a new location.
Our Call Manager uses the old DT-24 cards for our current PRI gateways,
but I need to go with something else for this location.
I can either go with a new card for a 3845 router (NM-1CE1T1-PRI) that I
have at the location or I can look for a used card (NM-HDV?) for some
old VG200s I have available.
(Actually from the cisco site it looks like my 3.2.3 Call Manager may
not support the NM-1CE1T1-PRI card for the 3845.)

Do I have the correct options in mind? All I need is a gateway for the
PRI . (voice-only PRI, not integrated)

Any direction would help.
Thanks,
Paul



LEGAL NOTICE:
Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. Access to this e-mail by anyone else is unauthorized. If you are not an addressee, any disclosure or copying of the contents or any action taken (or not taken) in reliance on it is unauthorized and may be unlawful. If you are not an addressee, please inform the sender immediately.