[cisco-voip] Antwort: CFwdAll - not quite

Tue Mar 28 10:05:31 EST 2006

Maybe I'm missing it, but I don't see any reference to CallFwdAll in the solution, only for CallPickup.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Sanity First : Number of days with fewer than
50 messages in my inbox at the end of the day:         14
  ----- Original Message ----- 
  From: Hans-Peter Walter 
  To: Martin Lohnert 
  Cc: cisco-voip-bounces at puck.nether.net ; cisco-voip at puck.nether.net 
  Sent: Tuesday, March 28, 2006 9:25 AM
  Subject: [cisco-voip] Antwort: CFwdAll - not quite

  I had the same issue ;-), it's a feature... but there's a solution from Wes: 
  https://puck.nether.net/pipermail/cisco-voip/2006-February/010023.html 

  hey,
  I have a hunt pilot (-0) for our front desk.
  In the associated hunt list (HL), I have a line group (LG) with several 
  phones (circular).

  When a customer calls the -0, and somebody tries to PICKUP a ringing 
  phone, nothing 
  happens. When I directly call a DN of any phone, any other phone can 
  pickup that call.
  So the problem: I can not pickup calls from a HP/HL/LG, but I'm not sure 
  whether this is a 
  bug or a feature ;-). I googled and found 
  http://www.ciscotaccc.com/voice/showcase?case=K11612191

  By the way, in another setup I have a HP (-00) with a HL with several LG, 
  and in the first LG there is only 
  one DN (another Front Desk with only one person). When that phone is on 
  "CallForwardAll", calls for the 
  HP/HL/LG (-00) are not forwarded, the phone rings ;-). I found a 
  workaround, but is there another solution?

  thanks

  ================================================================================================================ 

The cisco.com article you reference is spot on.&nbsp; This is only 'fixed'
 in 4.1(3)sr2 or 4.1(3)es30 and later.&nbsp; Note the 'fix' is not fully
 regression tested so your mileage may vary. 
 
 How to enable this functionality after upgrade to appropriate version: 
 1. Enter CSCsb42763 (in mixed case)&nbsp; in&nbsp; the&nbsp; Enterprise Parameter
 'Cisco Support Use 1'&nbsp; under&nbsp; 
 &nbsp;&nbsp;&nbsp; the new group 'Cisco Support use Only'&nbsp; and click update. Only the
 value CSCsb42763 in this 
 &nbsp;&nbsp;&nbsp; parameter&nbsp; can enable the&nbsp; configuration in step 2.&nbsp; Change the
 value to&nbsp; anything else to 
 &nbsp;&nbsp; disable this functionality. 
 2. Go to Hunt Pilot Configuration page and select a call pickup group&nbsp;
 from the Call Pickup Group 
 &nbsp;&nbsp; dropdown list and click update. 
 
 /Wes

        "Martin Lohnert" <lohnert at gmail.com> 
        Gesendet von: cisco-voip-bounces at puck.nether.net 
        28.03.2006 15:52 
       An cisco-voip at puck.nether.net  
              Kopie  
              Thema [cisco-voip] CFwdAll - not quite 

  Hey all, 
  I've just found a situation where a phone with Call-Forward-All enabled will ring. If that phone is a member of a hunt scenario (Hunt Pilot - Hunt List - Line Group) a call to the hunt pilot will simply ring on the phone as normal, ignoring CFwdAll setting... This is with CCM4.1.3sr3a. Bug or Feature? :) 
  ML_______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip

------------------------------------------------------------------------------

  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060328/4fd7cc7f/attachment.html 