[cisco-voip] Time scheduling problems with daylight savings

[Pritchard, Jon]

What country/time zone are you in?   DST doesn't start here in the US until April 2.

Check the time zone in the partition to see that it matches the time zone of the date/time group in the device pool used by the phones.

Jon

-----------------------------------------------------------------------

Message: 5
Date: Wed, 29 Mar 2006 09:56:37 +0200
From: "Ruben Montes \(EU\)" <Ruben.Montes at eu.didata.com>
Subject: [cisco-voip] Time scheduling problems with daylight savings
Cc: <cisco-voip at puck.nether.net>
Message-ID:
	<FA233791F398B848B978464507739E8F0C5D03 at EUBEBRUSVEX1.eu.didata.local>
Content-Type: text/plain; charset="iso-8859-1"

Hi,

I have time scheduling configured in a CallManager to allow National calls only from 7:30 to 19:30. This past weekend the time was changed automatically by Windows to enable daylight savings: the time is correct in both the CCM and the phones, but now the calls can only be done from 8:30 to 20:30. 
It seems the CCM hasn't applied the daylight savings... Has anybody else encountered this problem? I assume that if I restart the CCM service it will work again: is it necessary to do so?

Thanks in advance,

Ruben
cis

                       All Content of this document is ADP Confidential 2006
Jon Pritchard - Sr. Network Engineer
Network Solutions Group
ADP Dealer Services, 2525 SW First Avenue, Portland, OR  97201
phone: (503) 205-4428, fax: (503) 402-3277
email: Jon_Pritchard at adp.com


 



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.