[cisco-voip] Unity MWI after Exchange restart

[Bell, Joe]

Open Cisco Unity Tool Depot, expand Switch Integration Tools, double
click Telephone Integration Manager.  Expand your integration and
highlight the Properties icon in the left hand window.

 

On the bottom of the right hand window is a check box with a description
of: MWI Resynchronization.  Check the box and click the "Resynchronize
Now" box.  You can set this up to resynch every night on some time
increment too.

 

Joe

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, March 31, 2006 8:53 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity MWI after Exchange restart

 

I was just asked but I have forgotten the answer.

 

If you're running Unity UM and you reboot your Exchange server.  The MWI
lights get screwed up, due to the logging in of the mailboxes by unity.
What service can you restart to get unity logged back into the mailboxes
so the MWI works again?

 

Thanks

 

Scott



This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060331/e51e9e9b/attachment.html