[cisco-voip] Unity MWI after Exchange restart
Ryan Ratliff
rratliff at cisco.com
Fri Mar 31 12:28:23 EST 2006
Officially no service restart should be needed. UMR should see the
Exchange server go offline and come back. When it comes back UMR
should tell Notifier to re-register for mapi notifications.
-Ryan
On Mar 31, 2006, at 12:25 PM, Bell, Joe wrote:
Open Cisco Unity Tool Depot, expand Switch Integration Tools, double
click Telephone Integration Manager. Expand your integration and
highlight the Properties icon in the left hand window.
On the bottom of the right hand window is a check box with a
description of: MWI Resynchronization. Check the box and click the
“Resynchronize Now” box. You can set this up to resynch every night
on some time increment too.
Joe
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-
bounces at puck.nether.net] On Behalf Of Voll, Scott
Sent: Friday, March 31, 2006 8:53 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Unity MWI after Exchange restart
I was just asked but I have forgotten the answer.
If you’re running Unity UM and you reboot your Exchange server. The
MWI lights get screwed up, due to the logging in of the mailboxes by
unity. What service can you restart to get unity logged back into
the mailboxes so the MWI works again?
Thanks
Scott
This message and any attachments are intended only for the use of the
addressee and may contain information that is privileged and
confidential. If the reader of the message is not the intended
recipient or an authorized representative of the intended recipient,
you are hereby notified that any dissemination of this communication
is strictly prohibited. If you have received this communication in
error, please notify us immediately by e-mail and delete the message
and any attachments from your system.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
More information about the cisco-voip
mailing list