[cisco-voip] DTMF to Unity stopped working after CCM upgrade
Pat Hayes
pat-cv at wcyv.com
Sun Jul 1 16:59:11 EDT 2007
Sounds like you need to narrow this down to a problem on the phone,
callmanger, or unity. Incoming digits are pretty easy to read in the
traces, they are sent out of band. Easier still, get a packet capture
from each point. You'll see a separate packet sent for each digit (SCCP
or SIP) and ethereal/wireshark can decode them all natively. If you're
not familiar with what the digits look like 'normally', get a capture of
your 'working' case first.
Start with a capture at the phone and at Unity. Is the phone sending
them? Are they being received by Unity?
-------- Original Message --------
From: "Jonathan Charles" <jonvoip at gmail.com>
To: "Paul Choi" <asobihoudai at yahoo.com>
Cc: cisco-voip <cisco-voip at puck.nether.net>
Subject: Re:[cisco-voip] DTMF to Unity stopped working after CCM upgrade
Date: 7/1/2007 3:25 PM
> OK, let me say this again...
>
> If the call comes in through the PSTN, DTMF works just fine.
>
> If the user picks up the handset and hits their messages button, DTMF
> works just fine (or if they hit the speakerphone button and then hit
> messages).
>
> The issue ONLY appears if you just hit the messages button while the
> handset is in the cradle.
>
> Then, and only then, Unity does not receive the DTMF.
>
>
>
> Jonathan
More information about the cisco-voip
mailing list