[cisco-voip] Message type not implemented
param singh
paramds at gmail.com
Thu Jul 26 22:29:36 EDT 2007
Hi All,
I have a customer who is having problems with their main number. They have a
new PRI and all the DID's on the PRI works fine but the main number is not
working.
I am getting the following error when I call the number.
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98382
Exclusive, Channel 2
Facility i = 0x9F8B0100A10F02010106072A8648CE1500040A0100
Protocol Profile = Networking Extensions
0xA10F02010106072A8648CE1500040A0100
Component = Invoke component
Invoke Id = 1
Operation = InformationFollowing (calling_name)
Name information in subsequent FACILITY
message
Calling Party Number i = 0x2183, '3129251265'
Plan:ISDN, Type:National
Called Party Number i = 0xC1, '6513328000'
Plan:ISDN, Type:Subscriber(local)
Jul 26 16:48:46.606: ISDN Se0/1/0:23 Q931: TX -> SETUP_ACK pd = 8 callref =
0xA43A
Channel ID i = 0xA98382
Exclusive, Channel 2
Jul 26 16:48:46.618: ISDN Se0/1/0:23 Q931: RX <- STATUS pd = 8 callref =
0x243A
Cause i = 0x80E10D - Message type not implemented
Has anybody experienced this and is there something I need to be aware of or
change in Call manager to make this work. Please let me know.
Thanks
Param Singh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20070726/a83f0b6d/attachment.html
More information about the cisco-voip
mailing list