[cisco-voip] Adding a CUCM Subscriber

[Jonathan Charles]

Do you have node and feature licenses loaded on the Publisher? Are the
services started (not just activated)... what version of CCM? I am
guessing 6.X...



Jonathan

On Fri, Aug 1, 2008 at 3:57 AM, Mike Hawley (AU)
<Mike.Hawley at didata.com.au> wrote:
> Hi, I have an issue when I am trying to add a Subscriber server to a new
> Publisher.  They are in different subnets (10.111.128.x, and 10.111.144.x)
> but within the same lab setup.
>
>
>
> What happens is the first Subscriber server fails to add itself to the new
> database, and gives me an error of "Configuration validation with ANBAK2-C1
> (10.111.128.10) failed"
>
>
>
> We get asked if it is the first node and we say no, but we still get the
> following message; "Configured 1st node ANBAK2-C1 is not a 1st node "
>
>
>
> I have done the following so far;
>
>
>
> 1.    Setup SUB as a new server in database
>
> 2.    Started all the CUCM services on Pub
>
>
>
> We moved the sub server to the same subnet, which works successfully.  I
> cannot leave it like this as my customer wants the servers in different
> geographic locations.
>
>
>
> Any help appreciated...
>
>
>
> Mike
>
> ******************************************************************************
>
> - NOTICE FROM DIMENSION DATA AUSTRALIA
>
> This message is confidential, and may contain proprietary or legally
> privileged information. If you have received this email in error, please
> notify the sender and delete it immediately.
>
>
>
> Internet communications are not secure. You should scan this message and any
> attachments for viruses. Under no circumstances do we accept liability for
> any loss or damage which may result from your receipt of this message or any
> attachments.
>
> ******************************************************************************
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>