[cisco-voip] CUE Password Reset

[Erick Bergquist]

It probably is the username/password from the router, not the CUE.
The router is prompting for authentication on that line (vty)
connection.


On Sat, Aug 2, 2008 at 9:33 PM, Ryan West <rwest at zyedge.com> wrote:
> I usually configure an alias to go to the cue from the CLI, from there you
> can create a new user and assign them to the admin group.
>
>
>
> http://www.cisco.com/en/US/products/sw/voicesw/ps5520/products_password_recovery09186a008042aa29.shtml#c1
>
>
>
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Gregory Wong
> Sent: Saturday, August 02, 2008 5:51 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] CUE Password Reset
>
>
>
> Does anyone know how to reset the password on an AIM-CUE? When I try to gain
> access through a session it prompts me for a Username/Password and I'm not
> sure what it is. I tried to run service-engine service-module 0/0
> password-reset but it says that failed.
>
> Thanks.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>