[cisco-voip] Newbie question- pls save me

[N Mohamed]

  ----- Original Message ----- 
  From: N Mohamed 
  To: cisco voip 
  Sent: Thursday, August 07, 2008 11:58 PM
  Subject: Newbie question- pls save me


  Hi,

  I am testing a simple VOIP before an actual deployment.
                                        (10.1.1.0/32)
  Phone1---PBX1----Router1-----------Router2----PBX2---Phone2
  (1140)                                                                  (1120)
  Installed a Voice IOS in the 2811 router with FXO ports.
  The PBX is connecting to the FXO port using RJ11 cable.

  I configured this:

  Router1:
  dial-peer voice 1 pots
  destination pattern 1140
  port 0/0/0

  dial-peer voice 12 voip
  destination pattern 1120
  session target ipv4:10.1.1.2


  Router2:
  dial-peer voice 2 pots
  destination pattern 1120
  port 0/0/0

  dial-peer voice 22 voip
  destination pattern 1140
  session target ipv4:10.1.1.1

  Now in the Router1 i tried a test call by this command: csim start 1140, but i got a disconnect message.

  My doubt is Whether the Router1 and PBX would talk automatically or a special config is reqd?
  Also, if i lift the handset of Phone1, I hear a dial tone.  Then if I try to press number 9 for outward dialling, then
  I hear no sound.  I expect the Router1 should send a dial tone.  This is not happening.

  Pls help.

  Regards
  Mohamed.



********** DISCLAIMER **********
Information contained and transmitted by this E-MAIL is proprietary to 
Sify Limited and is intended for use only by the individual or entity to 
which it is addressed, and may contain information that is privileged, 
confidential or exempt from disclosure under applicable law. If this is a 
forwarded message, the content of this E-MAIL may not have been sent with 
the authority of the Company. If you are not the intended recipient, an 
agent of the intended recipient or a  person responsible for delivering the 
information to the named recipient,  you are notified that any use, 
distribution, transmission, printing, copying or dissemination of this 
information in any way or in any manner is strictly prohibited. If you have 
received this communication in error, please delete this mail & notify us 
immediately at admin at sifycorp.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080808/8818fb2b/attachment.html>