[cisco-voip] FAC inter-digit timeout

[Tim Smith]

Im not too sure on FAC.

But on your route list > route group binding...
You should have a pre-dot trailing # option.

Cheers,

Tim.


On 14 Aug 2008 13:02:38 +0000, Carter, Bill <bcarter at sentinel.com> wrote:
>
> Customer complains about they delay time after entering FAC. I lowered
> inter-digit timeout to 7secs and dont want to go much lower. All codes are
> 3-digit.
>
> Im trying pressing # after fac but this is causing problems on the vg. I
> think CM is sending the # to the vg. I will check for the CM service
> parameter to strip trailing #.
>
> bill
>
> ****This message was sent from my Nokia E61i****
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080814/302c9c24/attachment-0001.html>