[cisco-voip] RTMT Error

[lotfi.amari at orange-ftgroup.com]

Hi Keith,

 

In all your attempts to login, did you check the "secure connection" checkbox ?

 

De : cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] De la part de Keith Klevenski
Envoyé : jeudi 14 août 2008 21:01
À : Jason Aarons (US); cisco-voip at puck.nether.net
Objet : Re: [cisco-voip] RTMT Error

 

No luck.  I can log in with ccmadministrator to ccmadmin no problem.  I mapped a drive as well, but did not make any difference.

 

Very strange...

 

 

....................................................................................   

 

Keith Klevenski

Manager, Telephony Engineering

 

1880 S. Dairy Ashford, Suite 300  |  Houston, TX  77077- 4760


Tel: 281.674.0702  |  Mobile: 713.677.3925  |  Fax: 281.674.0101

keith.klevenski at rig.net <mailto:keith.klevenski at rig.net> 

www.rig.net <http://www.rig.net/> 

 

 

 

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Thursday, August 14, 2008 12:25 PM
To: Keith Klevenski; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] RTMT Error

 

 

 

In 4.x you can also test mapping a drive to \\serverip\c$ <file:///\\serverip\c$>  and then try running RTMT.  

 

RTMT has drastically changed from 4.x to 5/6x.

 

I would test with ccmadministrator, if you open up IE and go to https://ip/ccmadmin <https://ip/ccmadmin>  on same computer can you login with ccmadministrator?

 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Keith Klevenski
Sent: Thu 8/14/2008 11:51 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] RTMT Error

I haven't fired up RTMT in a while and now I remember why.  When I start it up and try to log in with any account (local administrator or any CCM MLA user in the super user group) I get the following error:

 

"Access forbidden.  The RTMT application cannot be used by this user name and password (insufficient privileges)."

 

Out of 5 clusters I can connect with RTMT to 3 of the 5.  All running 4.1.3 SR6 except one that is running SR5d which I can connect to.  So I can connect to two SR6 clusters and there are two SR6 clusters I cannot connect to.  I have no clue why this would be... any ideas?

 

Thanks!

 

....................................................................................   

 

Keith Klevenski

Manager, Telephony Engineering

 

1880 S. Dairy Ashford, Suite 300  |  Houston, TX  77077- 4760


Tel: 281.674.0702  |  Mobile: 713.677.3925  |  Fax: 281.674.0101

keith.klevenski at rig.net <mailto:keith.klevenski at rig.net> 

www.rig.net <http://www.rig.net/> 

 

 

 

________________________________

Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 



*********************************
This message and any attachments (the "message") are confidential and intended solely for the addressees. 
Any unauthorised use or dissemination is prohibited.
Messages are susceptible to alteration. 
France Telecom Group shall not be liable for the message if altered, changed or falsified.
If you are not the intended addressee of this message, please cancel it immediately and inform the sender.
********************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080815/e9d73582/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 2687 bytes
Desc: image001.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080815/e9d73582/attachment.jpe>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 408 bytes
Desc: image002.jpg
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080815/e9d73582/attachment-0001.jpe>