[cisco-voip] MCS-7828-H3 Raid array

[Jason Aarons (US)]

Sorry story has changed from 7818-H3 to 7828-H3....I wish I had records
of what they bought...

 

How is the raid array in a 7828-H3 configured in both preloaded and when
installing media from disk?  During media install?  Is there anyway to
view a raid array ?

 

Customer bought a preloaded MCS-7828-H3 and a drive failed, now they
think the RAID array was "not setup properly". 

 

Since it was preloaded I didn't think anything had to be done to setup a
RAID array.

 

Bug perhaps?

 

Are there instructions from TAC on how to properly handle a failed drive
scenario? Perhaps something wasn't followed?

 

the Call Manager Server is down, and won't boot. I've just tried
rebooting it again, and it gets part of the way through the reboot, and
falls over at this spot -

 

'Checking Filesystems'

'Couldn't find matching Filesystems: LABEL=/partB'         [FAILED]

 

It currently sitting at a prompt saying -

 

'Give root password for maintenance':

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080822/5266a94c/attachment-0001.html>