[cisco-voip] Newbie: FXS ports on 2600/2811 not working

[Jonathan Charles]

The same VIC-2FXS card? Possibly a bad port.

Also, port 0 is on the right, port 1 is on the left as you look at it.



Jonathan

On Fri, Aug 22, 2008 at 9:15 PM, john edwards <voicenerd at googlemail.com>wrote:

> Hi,
>
> Got a newbie question for everyone - I have googled like crazy and
> spent hours trying to fix it, but I'm not making any headway. But, I
> have the feeling that I am missing something VERY simple.
>
> Thanks in advance for any help!
>
>
>
> I have a 2600 router and a VIC-2FXS card, but I can't get a dial-tone
> on the second port.
>
> My config is very simple:
>
> voice-port 1/0/0
>  cptone GB
> !
> voice-port 1/0/1
>  cptone GB
> !
>
>
> Also, I notice that when I pick up the phone attached to the first
> port (1/0/0), the green light next to the 1/0/1 port lights (1/0/0
> doesn't), and the 'show voice call summary' command shows that port
> 1/0/1 rather than 1/0/0 is off hook!!!!
>
> Does anyone know what the answer to this might be? Any hints and tips?
>
> (By the way, I also tried this with a 2811 with a VIC2-2FXS card with
> the above config, and got the same result!).
>
>
> Thanks,
>
> Voicenerd.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080822/71845d5f/attachment.html>