[cisco-voip] Modem & Faxes on FXS w/SCCP in CME

[Jason Aarons (US)]

Are they calls going in/out this same 28XX router?  If yes, it likely
won't matter sccp vs h323 vs mgcp. 

 

 I like MGCP for FXS ports for ease of programming in Callmanager.
Depends on end users experience.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of ROZA, Ariel
Sent: Wednesday, August 27, 2008 10:19 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Modem & Faxes on FXS w/SCCP in CME

 

Hi, all.

 

    I need to configure 4 FXS port on a 28XX router with CME4.X. All the
ports will have Faxes or Credit Card readers attached (modems)

    I can configure in the standard way, or I can configure them to use
SCCP and enable supplementary services and access to voicemail.

 

    I would like to know which of the two options is the best approach
for this. Does SCCP has any influence on fax or modem handling?

    Is there a preferred method?

 

    Best Regards,

 

Ariel




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080828/dfcaee1b/attachment-0001.html>