[cisco-voip] CUE MWI with variable length dialplan

[Paul]

CCME+CUE?
CCM+CUE?

Either way I think you can only setup one setting for the MWI on and one for MWI off. I'd think this is possible but I've never done an install that required it.

Paul



----- Original Message ----
From: Bill Talley <billt at aos5.com>
To: cisco-voip at puck.nether.net
Sent: Wednesday, July 2, 2008 7:36:59 AM
Subject: [cisco-voip] CUE MWI with variable length dialplan


I'm thinking this is not possible, or would be complicated to create a
work around, but here goes...

Does anyone know if it's possible to configure CUE mwi support for a
variable length dialplan?  Client has mixture of users with 3-digit and
4-digit extensions. 

Thanks
CONFIDENTIALITY NOTICE: This electronic mail transmission (including any accompanying attachments) is intended solely for its authorized recipient(s), and may contain confidential and/or legally privileged information. If you are not an intended recipient, or responsible for delivering some or all of this transmission to an intended recipient, be aware that any review, copying, printing, distribution, use or disclosure of the contents of this message is strictly prohibited. If you have received this electronic mail message in error, please delete it from your system without copying it, and contact sender immediately by Reply e-mail, or by calling 913-307-2300, so that our address records can be corrected.



Although this e-mail and any attachments are believed to be free of any virus or other defect that might negatively affect any computer system into which it is received and opened, it is the responsibility of the recipient to ensure that it is virus free and no responsibility is accepted by the sender for any loss or damage arising in any way in the event that such a virus or defect exists.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip