[cisco-voip] Call Waiting

[Lelio Fulgenzi]

There are settings on the line which allow you to set the phone's ring setting during idle or in use. There's options like beep, beep and ring, ring and flash, or something like that, etc.


--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Network Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Johnny Crothers 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, June 10, 2008 8:03 PM
  Subject: [cisco-voip] Call Waiting


  Hi all,

   

  Does anyone know if there is a way to get an audible tone in your earpiece for call waiting? I havnt got access to a CCM to check the service parameters, this is for CUCM 6.1

   

  Thanks for the help!

   

  Johnny


This communication, including any attachments, is confidential. If you are not the intended recipient, you should not read it - please contact me immediately, destroy it, and do not copy or use any part of this communication or disclose anything about it. Thank you. Please note that this communication does not designate an information system for the purposes of the Electronic Transactions Act 2002.



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080610/5e9b4d2d/attachment.html>