[cisco-voip] Upgrade CCM 5.1.2.1000 to 5.1.2.3130-1, voicegateway problem

Aman Chugh aman.chugh at gmail.com
Fri Jun 13 07:27:27 EDT 2008


Peter,

What do the syslogs in RTMT indicate for the time period when you see the E1
controller go down.

Aman


On 6/13/08, Peter Hubben <Peter.Hubben at simac.nl> wrote:
>
>  Hi,
>
> I have strange problems after i upgraded my CCM to 5.1.2.3130-1.
>
> The problems are with my 2801 voicegateway. There are errors on my E1
> controller, sometimes it goes down en by itself it comes up.
> This is the output from the command, sh controllers E1 and sh isdn status
>
> E1 0/3/0 is up.
>   Applique type is Channelized E1 - balanced
>   Description: ????????
>   No alarms detected.
>   alarm-trigger is not set
>   Version info Firmware: 20050620, FPGA: 16, spm_count = 0
>   Framing is CRC4, Line Code is HDB3, Clock Source is Line.
>   CRC Threshold is 320. Reported from firmware  is 320.
>   Data in current interval (161 seconds elapsed):
>      0 Line Code Violations, 0 Path Code Violations
>      0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
>      0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
>   Total Data (last 24 hours)
>      3 Line Code Violations, 6265 Path Code Violations,
>      0 Slip Secs, 4 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins,
>      1 Errored Secs, 0 Bursty Err Secs, 10 Severely Err Secs, 32 Unavail
> Secs
> VG-TWI-EHV-01#sh isdn status
> Global ISDN Switchtype = primary-net5
>
> %Q.931 is backhauled to CCM MANAGER 0x0003 on DSL 0. Layer 3 output may not
> apply
>
> ISDN Serial0/3/0:15 interface
>         dsl 0, interface ISDN Switchtype = primary-net5
>         L2 Protocol = Q.921 0x0000  L3 Protocol(s) = CCM MANAGER 0x0003
>     Layer 1 Status:
>         ACTIVE
>     Layer 2 Status:
>         TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
>     Layer 3 Status:
>         0 Active Layer 3 Call(s)
>     Active dsl 0 CCBs = 0
>     The Free Channel Mask:  0xFFFF7FFF
>     Number of L2 Discards = 0, L2 Session ID = 10
>     Total Allocated ISDN CCBs = 0
>
> Can anyone help m with this case??
>
>
>
> Met vriendelijke groet, best regards,
>
>    Peter Hubben
> junior management specialist
>
> Simac ICT Nederland bv
> E-mail: peter.hubben at simac.nl
> Telefoon: 031 (0)40 258 2868
> Internet: www.simac.com/nl/ict Ingeschreven onder KvK-nummer: 17054635
>
>
>
>
> ------------------------------
> Voor Simac's e-mail en anti-spam disclaimer, zie www.simac.com/disclaimer
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080613/bac764b6/attachment.html>


More information about the cisco-voip mailing list