[cisco-voip] Logical partioning with CME

[Aman Chugh]

Logical partitioning was also not allowed in India , you had to have
separate wan and pstn equipment, Cisco India in 2005 was the first company
in get such an approval as they wanted to a single phone on a desk rather
than an analog and IP phone.

Aman


On 6/19/08, Chuck.Statton at alconlabs.com <Chuck.Statton at alconlabs.com> wrote:
>
>  COR might not be enough to satisfy the requirements of the DoT in India.
> Ultimately, you would need the departments approval to deploy on CME.  The
> only Cisco IT case study I could find was based upon UCM.
>
>
> http://www.cisco.com/web/about/ciscoitatwork/unified_comm/ip_telephony_regulatory_compliance_in_india.html
>
>
>
>  ------------------------------
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Aman Chugh
> *Sent:* Wednesday, June 18, 2008 1:23 PM
> *To:* Joe Cisco
> *Cc:* cisco voip
> *Subject:* Re: [cisco-voip] Logical partioning with CME
>
>  Thanks Joe for replying , Would COR be useful in logically partitioning
> CME with TWO lines on an ephone with one line for internal calls and one
> line used for pstn calls.
>
> Aman
>
>
> On 6/18/08, Joe Cisco <smetsysocsic at gmail.com> wrote:
>>
>> You should be able to use COR:
>>
>>
>> http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html#wp1014179
>>
>> -Joe C.
>>
>>  On Wed, Jun 18, 2008 at 9:51 AM, Aman Chugh <aman.chugh at gmail.com>
>> wrote:
>>
>>
>>>  I need some help to come with a solution which is available in ccm but
>>> not in cme. In India we keep two different lines on IP Phones for Internal
>>> and PSTN calling due to regulations called logical partioning as we are not
>>> allowed to do toll bypass. We can easily do this with CCM with the help of
>>> partions and css but how can I have something similar with cme. My customer
>>> has a site in UK with CCM and cme in India. when some one calls from UK over
>>> the wan to an India IP Phone on cme using the wan , users can easily
>>> transfer , conference PSTN because of E1 line on the CME router. How can I
>>> have two lines on cme  ephone , one for internal calls and the other one for
>>> PSTN calls.
>>>
>>> any help is appreciated.
>>>
>>> Thanks,
>>>
>>> Aman
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>  This e-mail (including any attachments) is confidential and may be
> legally privileged. If you are not an intended recipient or an authorized
> representative of an intended recipient, you are prohibited from using,
> copying or distributing the information in this e-mail or its attachments.
> If you have received this e-mail in error, please notify the sender
> immediately by return e-mail and delete all copies of this message and any
> attachments.
> Thank you.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080619/8ecb8b12/attachment-0001.html>