[cisco-voip] silent monitor with out a CAD
David Toledo
DavidT at MorganMint.com
Fri Jun 20 13:35:48 EDT 2008
Base in my setup It cannot be done there is no other way around I really
need to have this agent
Monitored all the time can you suggest any other possibility that can be
have this agent monitored
Thanks
David
________________________________
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Friday, June 20, 2008 1:29 PM
To: David Toledo
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] silent monitor with out a CAD
Since your saying without CAD they must be agents? if so, you have to
setup a SPAN back to the other nic on the IPCCx server. layer 3 will be
an issue as RSPAN can't go across layer 3 wans. unless you can RSPAN
around the layer 3 link you are correct.
Scott
On Fri, Jun 20, 2008 at 10:20 AM, David Toledo <DavidT at morganmint.com>
wrote:
Hi
I'm trying to figure it out how to silent monitor an IPhone with out a
CAD.
What will my requirements? Someone said it cannot be done over layer 3
is that true?
This is my setup
1- pstn
2- gateway 2851
3- Switch 3560
4- 4- phones
Can some help me please to understand to make this works
Thanks
David
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080620/e6f80157/attachment.html>
More information about the cisco-voip
mailing list