[cisco-voip] BAT -- CM 4.1.3sr6a

[Scott Voll]

I'm just adding a templete.  not the phones yet.

Scott

On Wed, Jun 25, 2008 at 8:06 AM, Scott Coner (US) <scott.coner at us.didata.com>
wrote:

>  I've seen this before in CM 4.1(3) and it turned out to be a problem with
> the csv file (formatting didn't match the template).
>
>
>
> Scott
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Scott Voll
> *Sent:* Wednesday, June 25, 2008 10:48 AM
> *To:* cisco-voip at puck-nether.net
> *Subject:* [cisco-voip] BAT -- CM 4.1.3sr6a
>
>
>
> I'm using BAT on CM 4.1.3sr6a and trying to add a new template (I've done
> it before) but this time I get a pop up that says, "Error no." and that's
> it.  is this a bug?  What's up.  I would have thought it would give me a
> little more info.
>
>
>
> thanks
>
>
>
> Scott
>
> ------------------------------
>
> *Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080625/a3951159/attachment.html>