we have a 7206 vxr with a pa2t3 card. this card has one t3 plugged into it.
several times a week we loose communications across the t3. when i do a
show interface on that interface it says that the line is up but the
protocol is down. i shut the port and no shut it and it comes right back.
we have run loopback tests end to end several times and it tests perfect.
also, none of the telcos involved show ANY errors or drops on the circuit.
any ideas?
thanks,
jim
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:11:54 EDT