RE: [nsp] Intergrated routing/bridging

From: Ryan OConnell (ryan-nsp@complicity.co.uk)
Date: Wed Apr 24 2002 - 10:14:05 EDT


On 24-Apr-2002 Vladimir Litovka wrote:
> I need to move server from one office to another, but need to save it's IP
> address. The configuration (one two routers) is:
[snip]

A while since I tried doing something like this, but try adding "bridge 1 bridge
ip" to both routers. It may also help if you add a BVI interface to the second
router with an IP address so you can ping it for diagnostics.

-- 
Ryan O'Connell - CCIE #8174
ryan@complicity.co.uk
http://www.complicity.co.uk/



This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:42 EDT