Yuriy:
You can change the vlan database said
vlan 3 said 10
This should allow you to intermix the 3com and the cisco.
==DMT>
===========================================
Douglas M. Todd, Jr.
Network Engineering East (MGH)
Partners Health Care
Charlestown, MA 02129
CCNP, CCI
> -----Original Message-----
> From: Yuriy Kuznetsov [mailto:yuriy@uni-svishtov.bg]
> Sent: Saturday, June 15, 2002 1:42 AM
> To: cisco-nsp@puck.nether.net
> Subject: [nsp] 29xx and 3COM Vlan
>
>
> Hi
> I have problems with C2924 and 3COM (3300) 802.1q trunk.
> Cisco vlan 3 have SAID is 100003 but 3com 802.1Q VLAN ID not support
> that big number... I reduce number into Cisco, make vlan with
> same name
> and
> ID into 3com add port to this vlan but no effect:( pc
> connected to this
> port (vlan3 3com) do not
> see PC into Cisco vlan3, but see pc into Cisco vlan1 (Cisco default
> vlan).... Where is my mistake?
>
> I know that is not exactly Cisco question, but end point
> switches in my
> network are 3com:(
>
> TIA
>
>
>
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:47 EDT