Thanks Arie,
The switch that we bought does not have a fiber uplink so we bought
Allied telesyn switches (2-port swtich.. one port is RJ-45 and the other is
fiber) to connect the switches. Should this affect the VTP port in between
the Cisco switches?
Should there be any problem with VLAN if another switch technology
goes in between the VLAN trunking of Cisco?
James
Hi James
a) You could trunk one port of the switch to your router and handle on your
router
all necessary inter-vlan traffic (often done)
search on CCO for inter-vlan to find some sample configs for your
job. You
might
only face a problem with this approach due to the limited bandwith
on the
trunked
port, if you have mainly inter-vlan traffic. maybe monitoring
bandwith with
mrtg
(via snmp) on that port would be a good idea.
b) you can buy a l3 switch with is able to route inter-vlan traffic
internally
regards
arie
-----Ursprüngliche Nachricht-----
Von: James Caasi [mailto:jamesky@hotmail.com]
Gesendet: Montag, 22. Juli 2002 08:12
An: cisco-nsp@puck.nether.net
Betreff: [nsp] Help with VLAN
Hello,
We are going to implement VLAN mainly to separate the broadcast
traffic from one segment to another.
We have existing Cisco 2620 (one FastE port) and Cisco layer 2
switches. We have office users on one segment and some production machines
on another.
Should I need a layer 3 switch for this connected after the router? Or
I only need the router to separate the two segments (using VLAN
configuration) on the layer 2 Cisco switches?
TIA,
James
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
This archive was generated by hypermail 2b29 : Sun Aug 04 2002 - 04:13:50 EDT